You are viewing documentation for Kubernetes version: v1.19

Kubernetes v1.19 documentation is no longer actively maintained. The version you are currently viewing is a static snapshot. For up-to-date documentation, see the latest version.

Logging Using Stackdriver

Before reading this page, it's highly recommended to familiarize yourself with the overview of logging in Kubernetes.

Note: By default, Stackdriver logging collects only your container's standard output and standard error streams. To collect any logs your application writes to a file (for example), see the sidecar approach in the Kubernetes logging overview.

Deploying

To ingest logs, you must deploy the Stackdriver Logging agent to each node in your cluster. The agent is a configured fluentd instance, where the configuration is stored in a ConfigMap and the instances are managed using a Kubernetes DaemonSet. The actual deployment of the ConfigMap and DaemonSet for your cluster depends on your individual cluster setup.

Deploying to a new cluster

Google Kubernetes Engine

Stackdriver is the default logging solution for clusters deployed on Google Kubernetes Engine. Stackdriver Logging is deployed to a new cluster by default unless you explicitly opt-out.

Other platforms

To deploy Stackdriver Logging on a new cluster that you're creating using kube-up.sh, do the following:

  1. Set the KUBE_LOGGING_DESTINATION environment variable to gcp.
  2. If not running on GCE, include the beta.kubernetes.io/fluentd-ds-ready=true in the KUBE_NODE_LABELS variable.

Once your cluster has started, each node should be running the Stackdriver Logging agent. The DaemonSet and ConfigMap are configured as addons. If you're not using kube-up.sh, consider starting a cluster without a pre-configured logging solution and then deploying Stackdriver Logging agents to the running cluster.

Warning: The Stackdriver logging daemon has known issues on platforms other than Google Kubernetes Engine. Proceed at your own risk.

Deploying to an existing cluster

  1. Apply a label on each node, if not already present.

    The Stackdriver Logging agent deployment uses node labels to determine to which nodes it should be allocated. These labels were introduced to distinguish nodes with the Kubernetes version 1.6 or higher. If the cluster was created with Stackdriver Logging configured and node has version 1.5.X or lower, it will have fluentd as static pod. Node cannot have more than one instance of fluentd, therefore only apply labels to the nodes that don't have fluentd pod allocated already. You can ensure that your node is labelled properly by running kubectl describe as follows:

    kubectl describe node $NODE_NAME
    

    The output should be similar to this:

    Name:           NODE_NAME
    Role:
    Labels:         beta.kubernetes.io/fluentd-ds-ready=true
    ...
    

    Ensure that the output contains the label beta.kubernetes.io/fluentd-ds-ready=true. If it is not present, you can add it using the kubectl label command as follows:

    kubectl label node $NODE_NAME beta.kubernetes.io/fluentd-ds-ready=true
    
    Note: If a node fails and has to be recreated, you must re-apply the label to the recreated node. To make this easier, you can use Kubelet's command-line parameter for applying node labels in your node startup script.
  2. Deploy a ConfigMap with the logging agent configuration by running the following command:

    kubectl apply -f https://k8s.io/examples/debug/fluentd-gcp-configmap.yaml
    

    The command creates the ConfigMap in the default namespace. You can download the file manually and change it before creating the ConfigMap object.

  3. Deploy the logging agent DaemonSet by running the following command:

    kubectl apply -f https://k8s.io/examples/debug/fluentd-gcp-ds.yaml
    

    You can download and edit this file before using it as well.

Verifying your Logging Agent Deployment

After Stackdriver DaemonSet is deployed, you can discover logging agent deployment status by running the following command:

kubectl get ds --all-namespaces

If you have 3 nodes in the cluster, the output should looks similar to this:

NAMESPACE     NAME               DESIRED   CURRENT   READY     NODE-SELECTOR                              AGE
...
default       fluentd-gcp-v2.0   3         3         3         beta.kubernetes.io/fluentd-ds-ready=true   5m
...

To understand how logging with Stackdriver works, consider the following synthetic log generator pod specification counter-pod.yaml:

apiVersion: v1
kind: Pod
metadata:
  name: counter
spec:
  containers:
  - name: count
    image: busybox
    args: [/bin/sh, -c,
            'i=0; while true; do echo "$i: $(date)"; i=$((i+1)); sleep 1; done']

This pod specification has one container that runs a bash script that writes out the value of a counter and the datetime once per second, and runs indefinitely. Let's create this pod in the default namespace.

kubectl apply -f https://k8s.io/examples/debug/counter-pod.yaml

You can observe the running pod:

kubectl get pods
NAME                                           READY     STATUS    RESTARTS   AGE
counter                                        1/1       Running   0          5m

For a short period of time you can observe the 'Pending' pod status, because the kubelet has to download the container image first. When the pod status changes to Running you can use the kubectl logs command to view the output of this counter pod.

kubectl logs counter
0: Mon Jan  1 00:00:00 UTC 2001
1: Mon Jan  1 00:00:01 UTC 2001
2: Mon Jan  1 00:00:02 UTC 2001
...

As described in the logging overview, this command fetches log entries from the container log file. If the container is killed and then restarted by Kubernetes, you can still access logs from the previous container. However, if the pod is evicted from the node, log files are lost. Let's demonstrate this by deleting the currently running counter container:

kubectl delete pod counter
pod "counter" deleted

and then recreating it:

kubectl create -f https://k8s.io/examples/debug/counter-pod.yaml
pod/counter created

After some time, you can access logs from the counter pod again:

kubectl logs counter
0: Mon Jan  1 00:01:00 UTC 2001
1: Mon Jan  1 00:01:01 UTC 2001
2: Mon Jan  1 00:01:02 UTC 2001
...

As expected, only recent log lines are present. However, for a real-world application you will likely want to be able to access logs from all containers, especially for the debug purposes. This is exactly when the previously enabled Stackdriver Logging can help.

Viewing logs

Stackdriver Logging agent attaches metadata to each log entry, for you to use later in queries to select only the messages you're interested in: for example, the messages from a particular pod.

The most important pieces of metadata are the resource type and log name. The resource type of a container log is container, which is named GKE Containers in the UI (even if the Kubernetes cluster is not on Google Kubernetes Engine). The log name is the name of the container, so that if you have a pod with two containers, named container_1 and container_2 in the spec, their logs will have log names container_1 and container_2 respectively.

System components have resource type compute, which is named GCE VM Instance in the interface. Log names for system components are fixed. For a Google Kubernetes Engine node, every log entry from a system component has one of the following log names:

  • docker
  • kubelet
  • kube-proxy

You can learn more about viewing logs on the dedicated Stackdriver page.

One of the possible ways to view logs is using the gcloud logging command line interface from the Google Cloud SDK. It uses Stackdriver Logging filtering syntax to query specific logs. For example, you can run the following command:

gcloud beta logging read 'logName="projects/$YOUR_PROJECT_ID/logs/count"' --format json | jq '.[].textPayload'
...
"2: Mon Jan  1 00:01:02 UTC 2001\n"
"1: Mon Jan  1 00:01:01 UTC 2001\n"
"0: Mon Jan  1 00:01:00 UTC 2001\n"
...
"2: Mon Jan  1 00:00:02 UTC 2001\n"
"1: Mon Jan  1 00:00:01 UTC 2001\n"
"0: Mon Jan  1 00:00:00 UTC 2001\n"

As you can see, it outputs messages for the count container from both the first and second runs, despite the fact that the kubelet already deleted the logs for the first container.

Exporting logs

You can export logs to Google Cloud Storage or to BigQuery to run further analysis. Stackdriver Logging offers the concept of sinks, where you can specify the destination of log entries. More information is available on the Stackdriver Exporting Logs page.

Configuring Stackdriver Logging Agents

Sometimes the default installation of Stackdriver Logging may not suit your needs, for example:

  • You may want to add more resources because default performance doesn't suit your needs.
  • You may want to introduce additional parsing to extract more metadata from your log messages, like severity or source code reference.
  • You may want to send logs not only to Stackdriver or send it to Stackdriver only partially.

In this case you need to be able to change the parameters of DaemonSet and ConfigMap.

Prerequisites

If you're using GKE and Stackdriver Logging is enabled in your cluster, you cannot change its configuration, because it's managed and supported by GKE. However, you can disable the default integration and deploy your own.

Note: You will have to support and maintain a newly deployed configuration yourself: update the image and configuration, adjust the resources and so on.

To disable the default logging integration, use the following command:

gcloud beta container clusters update --logging-service=none CLUSTER

You can find notes on how to then install Stackdriver Logging agents into a running cluster in the Deploying section.

Changing DaemonSet parameters

When you have the Stackdriver Logging DaemonSet in your cluster, you can just modify the template field in its spec, daemonset controller will update the pods for you. For example, let's assume you've just installed the Stackdriver Logging as described above. Now you want to change the memory limit to give fluentd more memory to safely process more logs.

Get the spec of DaemonSet running in your cluster:

kubectl get ds fluentd-gcp-v2.0 --namespace kube-system -o yaml > fluentd-gcp-ds.yaml

Then edit resource requirements in the spec file and update the DaemonSet object in the apiserver using the following command:

kubectl replace -f fluentd-gcp-ds.yaml

After some time, Stackdriver Logging agent pods will be restarted with the new configuration.

Changing fluentd parameters

Fluentd configuration is stored in the ConfigMap object. It is effectively a set of configuration files that are merged together. You can learn about fluentd configuration on the official site.

Imagine you want to add a new parsing logic to the configuration, so that fluentd can understand default Python logging format. An appropriate fluentd filter looks similar to this:

<filter reform.**>
  type parser
  format /^(?<severity>\w):(?<logger_name>\w):(?<log>.*)/
  reserve_data true
  suppress_parse_error_log true
  key_name log
</filter>

Now you have to put it in the configuration and make Stackdriver Logging agents pick it up. Get the current version of the Stackdriver Logging ConfigMap in your cluster by running the following command:

kubectl get cm fluentd-gcp-config --namespace kube-system -o yaml > fluentd-gcp-configmap.yaml

Then in the value of the key containers.input.conf insert a new filter right after the source section.

Note: Order is important.

Updating ConfigMap in the apiserver is more complicated than updating DaemonSet. It's better to consider ConfigMap to be immutable. Then, in order to update the configuration, you should create ConfigMap with a new name and then change DaemonSet to point to it using guide above.

Adding fluentd plugins

Fluentd is written in Ruby and allows to extend its capabilities using plugins. If you want to use a plugin, which is not included in the default Stackdriver Logging container image, you have to build a custom image. Imagine you want to add Kafka sink for messages from a particular container for additional processing. You can re-use the default container image sources with minor changes:

  • Change Makefile to point to your container repository, for example PREFIX=gcr.io/<your-project-id>.
  • Add your dependency to the Gemfile, for example gem 'fluent-plugin-kafka'.

Then run make build push from this directory. After updating DaemonSet to pick up the new image, you can use the plugin you installed in the fluentd configuration.

Last modified August 07, 2020 at 4:46 PM PST: Tune links in tasks section (1/2) (b8541d2127)